For All LED Ambient Mood Lighting Needs

Our Newsletter


New 5050 SMD LED Mood Backlighting for TV and Home Use

Posted on 14th Nov 2011 @ 2:47 PM

2x24” (61cm) tubes 

 

 
 

  24_inch_tube_small.jpg

61x1.8x1.8


 


 

3.7 watts per tube, 7.4 watts per kit
120mA(You can add a maximum of 4x24” tubes per kit). The USB Mini-B connectors are on both ends of the tubes. You can mix and match tube sizes to suit you needs, the tubes can be connected directly to the control unit of which there are two ports or you can connect the tubes in a line / series, this works best for under cabinet lighting.

They come in 9, 15 and 24" sizes, please see other listings for different sizes. The tubes come in a protective casing but are not for outdoor use. The LEDs are 5050 SMD LEDs making the tubes super bright.

Because the tubes are mounted onto brackets you can swivel the tubes so they project at the right angle to maximise your backlighting.

2x15” (38cm) tubes

 

 15_inch_tube_small.jpg

 

38x1.8x1.8

2.2 watts per tube, 4.4 watts per kit

120mA

 

2x9” (22.9cm) tubes

 

 9_inch_tube_small.jpg

 

22.9x1.8x1.8

1.5 watts per tube, 3 watts per kit

120mA

 

Cables 

 
cables_small.jpg

Cables are 150cm long

USB Mini-B five pin male connectors

Extensions can be easily purchased 

Control Unit


control_unit_small.jpg

6.3x4.2x1.5

2x USB Mini B five pin female connector sockets

Even though there are only two sockets you can add up to 1.8A (1800mA) per kit.

Built in reciever, the control unit can be neatly tucked away and does not need to be seen.

Power Supply


power_supply_small.jpg

Plug: 8.3x4.5x3.5

Plug sits out 3.5cm from wall

Cable leading from plug to control unit is 143cm long

Input:100v-240v

50/60hz

Output:12VDC

1500mA

CE Rated and safe to use.

Remote Control


Remote_small.jpg


 9x5x0.5

  • Save 4 favourite colours
  •  Timed switch off
  •  Fade in and out of colours
  •  Music Mode – the colour varies according to sound intensity
  •  Smooth colour change and pause
  •  Manual colour adjustment
  • Change intensity
  • Change Speed

Hardware


Hardware_small.jpg

3.5x1.5x2.2



With the brackets the tubes will stand out 2.2cm from the surface.

  • 4xbrackets
  • Screws (optional)
  • Sticky pads (optional)
  • Stoppers for control unit